Configuration & Setup
User Navigation Icons
|
Nancy Administrator Posts: 765
10/17/2013
|
NancyAdministrator Posts: 765
There are several user interface customizations that can be enabled within PrintBoss.
PrintBoss Configurations Dialog\Menus tab
ENABLE TOOL BAR
From the PrintBoss\Configurations\Menus tab, check the Enable Tool Bar option to select the menu icons you want to appear as shortcuts on the Master Application window.
Once enabled, the icons will appear near the top of the Master Application window as shown below.
ENABLE MASTER MENU STATUS PANEL
Also from the PrintBoss\Configuration\Menus tab, note the box to Enable Master Menu Status Panel. When this box is checked, the lower half of the Master Application window shows the Capturing Status dialog (note above). This is a great feature for troubleshooting. When this box is not checked, the lower half of the Master Application window is suppressed. The value is checked by default.
ENABLE MASTER MENU STATUS TRAY (NORMALLY UNCHECKED)
Select this option to display the Status Tray at the bottom of the PrintBoss Master Application window.
RESET WINDOW SIZES
PrintBoss remembers the size and location of many of the windows in PrintBoss as a user naturally adjusts them. Click this button to reset all windows to their original default locations and sizes.
PrintBoss Configurations Dialog\Internal tab
From the PrintBoss\Configuration\Internal tab there are three options for user presentation.
Suppress dialogs when appropriate
Check one or all of the following options to stop PrintBoss from pop-up a window or flashing in the taskbar when it is processing documents: Print Dialog; Archive; E-mail; Fax Service.
Minimize PrintBoss on startup
Check this box to automatically minimize PrintBoss at startup.
When launched by Acct. Host. Terminate PrintBoss After Batch Print
Check this box to automatically close PrintBoss when it has been automatically opened by a print job. This will not close PrintBoss if the user manually opens the program.
PrintBoss Configurations Dialog\Legacy tab
Most of the settings on this tab are being discontinued. They are included for special cases where legacy installs of PrintBoss have relied on these features.
SHOW "SCAN SCOPE STATUS" BUTTON ON PRINT SCREEN
Set this option to Displayed to display the Scan Scope Status button on the PrintBoss Print Copies Dialog. This button is used to scan the status of the documents defined in the Scope. For example, it might display 3/15 next to the Original copy, indicating 3 of the 15 documents have been processed. Select Suppressed to hide this button on the PrintBoss Print Copies Dialog. The Default setting for new installs is to suppress this button.
"Stay On Top" method for Document Printing windows
This option should typically remain at the Default (Bring to front) value. Click on the drop down menu if you prefer a different method.
edited by Nancy on 10/18/2013
edited by Nancy on 10/24/2013
|
|
|
0
link
|